SMART IN FLOW CONTROL.

DYNAMIC SMART WIRELESS

SAM-LAN: the wireless network for local and district heating systems

SAM LAN is the new, innovative wireless network technology by SAMSON. SAM LAN can be used in existing or new properties without the need for additional communication cables (e.g. underground cables).

The smart, dynamic wireless network connects all house substations over unlicensed radio frequency bands. SAM LAN allows cost-effective management and control of local and district heating substations in properties. Integrated functions, such as remote maintenance access, simple data handling, and consumption metering, are additionally available to support users.


Technology

The SAM-LAN wireless technology is based on on LoRa Alliance technology (www.lora-alliance.org) and was developed for use with SAMSON heating controllers. The stand-alone network is particularly dynamic and flexible.

Thanks to ingenious software, the RF gateways used form dynamic, flexible wireless networks without having to rely on external providers. The topology of the wireless network provides several routes to forward data. The SAM LAN wireless mesh network impresses through its self-configuring and self-healing capabilities.

  • Simple: fast installation (plug and play)
  • Convenient: control and remote maintenance access
  • Universal: remote monitoring in urban and rural areas
  • Reliable and stable: communication through brick walls and from basements
  • Versatile: use with district heating stations (heating controllers, utility meters) as well as other end devices

      Special features

      • Internet of Things (IoT) using IPv6
      • Meshed network with multi-hop communication
      • Dynamic routing
      • Access points to the wireless network (aggregation nodes) with 80 wireless nodes (600 data points each)
      • Firmware update (over-the-air update)

      Wireless technology

        • LoRa Alliance technology: using ISM band (869 MHz)
        • Range up to 25 km (depending on attenuation)
        • Multiple antenna system (various antennas possible)

        Data security

        • Access point/broadband connection: TLS encryption
        • Wireless network: AES-256 encryption

          Data communication

          • Data rate up to 100 kbit/s
          • Continuous data aggregation
            • RS-232 and TTL (RJ-45) for end devices (Modbus-RTU)
              • e.g. TROVIS 5573, 5576, 5578, 5579 Heating Controllers
            • Meter bus interface (M-Bus) for maximum three M-bus loads
              Electricity, gas, water, heat
              • SMA connection for external antennas
            • Ethernet connection

              The SAMSON TROVIS TEAM-PORTAL serves as central platform to visualize your applications. This interface provides maximum transparency of all (heating) controllers, utility meters, and any other components within the SAM LAN wireless network. Besides the (remote) management of district heating stations, numerous other functions are integrated:

              • Processing and forwarding of utility meter data
              • Fault management
              • Analysis of historical data
              • User administration etc.

              The RF gateways can be easily configured for the wireless network over the integrated web server. Possible configuration of the network nodes includes:

              • Aggregation node (data collection and extraction)
              • Peripheral node
              • Wireless repeater

              Additionally, the wireless network is encrypted (AES-256). Once configured, the web server assists users during start-up and optimization of the wireless network.


              Application

              SAM LAN offers a wide range of applications, for example, in the local and district heating market. SAM-LAN provides a cost-effective management and control of new or existing properties connected to local and district heating networks. The data exchange over SAM LAN helps save energy and optimize existing systems.

                SAM LAN is state-of-the-art technology for simple, user-friendly networking of house substations. The system provides numerous benefits:

                • Easily upgradable system
                • No additional cost resulting from third-party suppliers
                • Energy management (operational and cost optimization)
                • Continuous monitoring (e.g. return flow temperatures)
                • Fault management
                • Simultaneous connection of heating controllers and utility meters

                  Data generated by (heating) controllers and utility meters in the wireless network are continuously logged. These data are forwarded cyclically to the SAMSON TEAM PORTAL for visualization:

                  Heating controllers:

                  • Logging of current plant data (e.g. flow and return flow temperature)
                  • Display of all existing plant schemes
                  • Access and change of controller parameters
                  • Manual override (pump and valve control)
                  • Others

                  Utility meters:

                  • Flow rate
                  • Volume
                  • Capacity
                  • Work
                  • Flow temperature
                  • Return flow temperature
                  • ID number

                  The SAM-LAN wireless network is already in use in a residential area (Paul-Hertz-Siedlung) in Berlin-Charlottenburg. The settlement covers an area of more than 500,000 m², on which over 120 buildings have been built.

                  The existing district heating stations have been fitted with SAMSON controllers from the TROVIS 5500 Automation System. Over 60 domestic substations are operated using an aggregation node and broadband connection. Additionally, the different buildings are visualized, managed, controlled, and serviced.

                  The meter data from the district heating stations are additionally logged using the meter bus interfaces of the RF gateway without controller.

                  Cooperation partners:


                  Products

                  Various SAMSON components are available for use with SAM LAN. The RF gateway serves as hardware for wireless networking of SAMSON (heating) controllers, for example. The special RF Network Planner software tool supports users in planning the network. The new TEAM PORTAL, the SAMSON's business solution for local heat and district heating (available from the end of September 2017), is used for visualization and includes additional functions.

                  RF GATEWAY

                  The RF gateway allows wireless networking with a mesh structure. The wireless technology works on the ISM band (869 MHz). Remote polling and control of heating and district heating controllers and/or utility meters (max. 3 M-Bus loads) is implemented using unlicensed radio frequency bands. In addition to a LAN port (configuration/broadband connection for aggregation nodes), it has an antenna jack (SMA). It allows the connection of an optional external antenna. The hardware fits neatly into the range of accessories for SAMSON heating controllers. The LEDs on the device provide a clear indication of the device status.

                  RF NETWORK PLANNER

                  The software was specially developed for SAM LAN and supports users in planning and starting up their own wireless networks. The metadata serve to manage customer-specific data. Through the integrated simulation function, the appropriate network structure is found and the ideal position of the aggregation node in the network calculated. The network analysis shows the actual state of the radio network and monitors the quality of wireless network connections.

                  Functions:

                  • Planning
                  • Network simulation
                  • Start-up
                  • Network status analysis
                  TROVIS TEAM PORTAL

                  The TROVIS TEAM PORTAL allows an all-round, transparent display and overview of all controllers and end devices in the SAM LAN wireless network. Through the access to individual controllers, it is possible to set and change control parameters and time schedules as well as poll all heat meters (meter readings). The logging functions allow trends, alarms, and parameters (selectable as required) to be logged. These data can be used for statistical purposes.

                  Communication with controllers is possible from anywhere and with any mobile device. Create an account free of charge at www.trovis-team.com.

                  The TROVIS TEAM PORTAL will be available from the end of September 2017.